Interface Switching

From Scriptel Wiki
Revision as of 12:56, 14 December 2017 by Samuel Lovetro (talk | contribs) (Created page with "Category:ScripTouch Toolbox Category:ScripTouch Assist '''Before you can switch the interface of a ScripTouch signature pad, you must be sure the following items are t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Before you can switch the interface of a ScripTouch signature pad, you must be sure the following items are true.

  • The signature pad is already EasyScript 3.0 compatible.
  • The signature pad is already plugged in.
  • All necessary software is already installed.

Instructions for ScripTouch Toolbox

Note: These setting will persist even if the pad is turned off.

  1. Open the ScripTouch Toolbox.
  2. Navigate to the output tab.
  3. Locate the Output mode Radio buttons, select desired.
Retrieved from "https://wiki.scriptel.com/index.php?title=Interface_Switching&oldid=1685"