Install Compact LCD Bumper: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==Video tutorial== <embedvideo service="youtube">https://www.youtube.com/watch?v=iK-cGAyBvmI</embedvideo> '''Install Compact LCD Bumper''' ==Instructions== ===Step 1: Inse...") |
(No difference)
|
Latest revision as of 11:55, 8 September 2022
Video tutorial
Install Compact LCD Bumper
Instructions
Step 1: Insert the Cable Connectors
- Start by pushing the cable connectors through the slot along the curved edge.
- Insert the pen cable in the center of the curve.
- Insert the USB cable to the right of that.
Step 2: Connect the cables to the pad
- Insert the pen connector "arrow side" up until it clicks.
- Insert the pad into the Bumper, working the back edge in first.
- Then insert each of the two front corners. You don't have to push too hard.
- Instead, work the front corners of the Bumper, one at a time, over the pad. Your Bumper will last longer if you don't force it.
- Once the pad is securely in the Bumper, it is ready for action.