Calibration using ScripTouch Toolbox

1. Download and install ScripTouch Toolbox by navigating to Scriptel downloads page .

   

2. Once you finish installing, Open the Toolbox.
3. Plug in your Scriptel signature pad now.

   

4. Select File then make sure Show Advanced is checked.

   

5. Select the Sensor tab then click the Calibrate Device button.

   

6. Press each of the 5 calibration points on the screen as they appear

Now your Scriptel signature pad should be calibrated.

For further assistance, or if you experience any problems, please contact our Support Team at support@scriptel.com or by phone at 844-972-7478 Mon-Fri 8am-5pm EST.