Epic Registry Values - Revision history

Jeremy Vasta: Added ForceRebootDelay registry option

2025-07-09T13:57:43Z

Added ForceRebootDelay registry option

← Older revision		Revision as of 09:57, 9 July 2025
Line 52:		Line 52:
	* Requires versions 5.1.16 or greater		* Requires versions 5.1.16 or greater
	* When enabled, reboots the signature pad at the start of the signature workflow		* When enabled, reboots the signature pad at the start of the signature workflow

			==ForceRebootDelay==
			* DWORD
			* Default 3000 (Decimal)
			* Requires versions 5.1.17 or greater
			* If ForceDeviceReboot is active, configures the delay after rebooting before attempting to reconnect to the device

	=Legacy Values=		=Legacy Values=

Jeremy Vasta: Added ForceDeviceReboot

2025-06-06T19:37:24Z

Added ForceDeviceReboot

← Older revision		Revision as of 15:37, 6 June 2025
Line 40:		Line 40:
	* When enabled, draws navigation buttons on the screen.		* When enabled, draws navigation buttons on the screen.

	== PreventRegions ==		==PreventRegions==
	* DWORD		* DWORD
	* Default 'No' (0)		* Default 'No' (0)
	* When enabled, no calls to region handling are made. Uses standard OK and CANCEL button regions. Applies in version later than 3.4.62		* When enabled, no calls to region handling are made. Uses standard OK and CANCEL button regions. Applies in version later than 3.4.62

	==Legacy Values==		=Troubleshooting Values=

			==ForceDeviceReboot==
			* DWORD
			* Default 'No' (0)
			* Requires versions 5.1.16 or greater
			* When enabled, reboots the signature pad at the start of the signature workflow

			=Legacy Values=

	===PreventScreenLock===		===PreventScreenLock===

John Powers: Added PreventRegions

2023-09-06T20:36:35Z

Added PreventRegions

← Older revision		Revision as of 16:36, 6 September 2023
Line 39:		Line 39:
	* Default 'Yes' (1)		* Default 'Yes' (1)
	* When enabled, draws navigation buttons on the screen.		* When enabled, draws navigation buttons on the screen.

			== PreventRegions ==
			* DWORD
			* Default 'No' (0)
			* When enabled, no calls to region handling are made. Uses standard OK and CANCEL button regions. Applies in version later than 3.4.62

	==Legacy Values==		==Legacy Values==

John Powers at 21:05, 28 February 2023

2023-02-28T21:05:30Z

@@ Line 27: / Line 27: @@
 * Default 'Yes' (1)
 * When set to zero, legacy signatures will not be checked against their signature hash. This is not the Document Hash, which still needs to be correct in order to decrypt the signature.
 =Signature Pad Display Values=
@@ Line 47: / Line 39: @@
 * Default 'Yes' (1)
 * When enabled, draws navigation buttons on the screen.

John Powers at 18:37, 30 September 2022

2022-09-30T18:37:36Z

← Older revision		Revision as of 14:37, 30 September 2022
Line 23:		Line 23:
	* Default "Please wait for signature prompt."		* Default "Please wait for signature prompt."
	* Single line of text (~40-50 characters recommended limit) organization can use to customize lock screen message.		* Single line of text (~40-50 characters recommended limit) organization can use to customize lock screen message.
	===CheckSignatureHash===		==CheckSignatureHash==
	* DWORD		* DWORD
	* Default 'Yes' (1)		* Default 'Yes' (1)

John Powers at 18:37, 30 September 2022

2022-09-30T18:37:05Z

← Older revision		Revision as of 14:37, 30 September 2022
Line 23:		Line 23:
	* Default "Please wait for signature prompt."		* Default "Please wait for signature prompt."
	* Single line of text (~40-50 characters recommended limit) organization can use to customize lock screen message.		* Single line of text (~40-50 characters recommended limit) organization can use to customize lock screen message.
			===CheckSignatureHash===
			* DWORD
			* Default 'Yes' (1)
			* When set to zero, legacy signatures will not be checked against their signature hash. This is not the Document Hash, which still needs to be correct in order to decrypt the signature.

	==Legacy Values==		==Legacy Values==

John Powers at 03:08, 7 September 2022

2022-09-07T03:08:22Z

← Older revision		Revision as of 23:08, 6 September 2022
Line 1:		Line 1:
	This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace. All keys unless otherwise stated require ScripTouch for Epic Hyperspace version 3.2.89 or greater to use.		This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace and Hyperdrive. All keys unless otherwise stated require ScripTouch for Epic Hyperspace version 3.2.89 or greater to use or any version of Hyperdrive.

	All registry values discussed in this article will require you to either navigate to or create the following registry key:		All registry values discussed in this article will require you to either navigate to or create the following registry key:

William Powell at 14:26, 30 April 2018

2018-04-30T14:26:52Z

← Older revision		Revision as of 10:26, 30 April 2018
Line 1:		Line 1:
	This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace. All keys unless otherwise stated require ScripTouch for Epic Hyperspace version 3.2.87 or greater to use.		This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace. All keys unless otherwise stated require ScripTouch for Epic Hyperspace version 3.2.89 or greater to use.

	All registry values discussed in this article will require you to either navigate to or create the following registry key:		All registry values discussed in this article will require you to either navigate to or create the following registry key:

William Powell: Created page with "This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace. All keys unless otherwise stated require ScripTouch for Epic Hyperspace..."

2018-04-30T13:48:13Z

Created page with "This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace. All keys unless otherwise stated require ScripTouch for Epic Hyperspace..."

New page

This article covers the registry values that are available for use with ScripTouch for Epic Hyperspace. All keys unless otherwise stated require ScripTouch for Epic Hyperspace version 3.2.87 or greater to use.

All registry values discussed in this article will require you to either navigate to or create the following registry key:

*Windows 32-bit: HKLM\Software\Scriptel Corporation\Epic
*Windows 64-bit: HKLM\Software\WOW6432Node\Scriptel Corporation\Epic

=Screen Lock Values=

==ScreenLockPrevent==
* DWORD
* Default 'No' (0)
* Determines if the graffiti lock screen will be used or not.
* Value overrides PreventScreenLock if present.

==ScreenLockToggleBacklight==
* DWORD
* Default 'Yes' (1)
* Toggles the backlight between on and off when the screen lock is in use.

==ScreenLockMessage==
* REG_SZ
* Default "Please wait for signature prompt."
* Single line of text (~40-50 characters recommended limit) organization can use to customize lock screen message.

==Legacy Values==

===PreventScreenLock===
* DWORD
* Default 'No' (0)
* Requires version 3.2.47 or greater (Deprecated as of 3.2.87)
* Determines if the graffiti lock screen will be used or not.

=Signature Pad Display Values=

==EnableSigPadLine==
* DWORD
* Default 'No' (0)
* When enabled, draws a signature line on the screen.

==EnableSigPadButtons==
* DWORD
* Default 'Yes' (1)
* When enabled, draws navigation buttons on the screen.