Scriptel Wiki - User contributions [en]

ScripTouch Sign and Save for Google Docs installation

2017-06-26T15:17:54Z

Max Campbell:

[[Category:ScripTouch Sign and Save]]
'''NOTE:''' If you have a '''[[ProScript]]''' interface (model number ending in a 0 or 5) you will also need to install the latest version of ScripTouch '''[[OmniScript]]''' which can be found on the '''[http://scriptel.com/support/downloads Scriptel Downloads page.]''' An installation guide for OmniScript can be found '''[[OmniScript installation|here.]]''' This does not apply to '''[[EasyScript]]''' interfaces (model numbers ending in 1 or 6).

<embedvideo service=youtube>https://www.youtube.com/watch?v=8-YUWEHLBpQ</embedvideo>

#Navigate to the '''[https://chrome.google.com/webstore/detail/scriptouch-sign-and-save/hmfodceejedffnkaejcddclmnhcjenmo Google Add-on Store page]''' and click the "+FREE" button.
#:[[File:Google docs install Step1 cursor over +FREE button.PNG|300x300px]]
#Click on "Continue" to allow the installation.
#:[[File:Google docs install Step2 cursor over Continue button.PNG|300x300px]]
#Click on "Allow" to complete the installation.
#:[[File:Google docs install Step3 cursor over Allow button.PNG|300x300px]]
#Open the document you want to sign in Google Docs
#Click on "Add-ons" near the top of the page, then "ScripTouch Sign and Save for Google Docs", and then "Sign Document".
#:[[File:Google docs install Step5 cursor over Sign Document in menus.PNG|300x300px]]
#Once the application sidebar opens click on the "Click Here to Sign" button.
#:[[File:Google docs install Step6 cursor over Click here to sign.PNG|300x300px]]
#Sign on your signature pad now. Be sure to press "OK" once you have finished signing.
#Click on the "ADD SIGNATURE" button below your signature. You may also change some aspects of the signature using the options below before adding.
#:[[File:Google docs install Step8 cursor over add signature button.PNG|300x300px]]
#With the signature added to your document you may now re-position, by clicking and dragging, and resize the signature, by clicking and dragging the handles along the outside of the box, if necessary.
#:[[ File:Google docs install Step9A cursor over signature to reposition it.PNG|300x300px]]
#:[[File:Google docs install Step9B cursor resizing signature.PNG|300x300px]]

OmniScript installation

2017-06-26T15:17:04Z

Max Campbell:

<embedvideo service=youtube>https://www.youtube.com/watch?v=8hQp_zNoDQA</embedvideo>

#Navigate to [http://scriptel.com/support/downloads Scriptel Downloads page] and click the “Download Now” button for ScripTouch OmniScript.
#:[[File:Omniscript install step1 Download now.PNG|300x300px]]
#Once the download finishes, run the installer.
#Read and agree to the End User License Agreement.
#:[[File:Omniscript install step3 accept the terms.PNG|300x300px]]
#Click on “Finish” to complete the installation.
#:[[File:Omniscript install step4 Finish.PNG|300x300px]]

ScripTouch Sign and Save for Google Sheets installation

2017-05-23T15:06:34Z

Max Campbell:

[[Category:ScripTouch Sign and Save]]
'''NOTE:''' If you have a '''[[ProScript]]''' interface (model number ending in a 0 or 5) you will also need to install the latest version of ScripTouch '''[[OmniScript]]''' which can be found on the '''[http://scriptel.com/support/downloads Scriptel Downloads page.]''' An installation guide for OmniScript can be found '''[[OmniScript installation|here.]]''' This does not apply to '''[[EasyScript]]''' interfaces (model numbers ending in 1 or 6).

<embedvideo service=youtube>https://www.youtube.com/watch?v=DpQAy8xZeWA</embedvideo>

#Navigate to the '''[https://chrome.google.com/webstore/detail/scriptouch-sign-and-save/igdddmdihfhkojibkpdjihdlfefkgdia Google Add-on Store page]''' and click the "+FREE" button.
#:[[File:Google sheets install Step1 cursor over +FREE button.PNG|300x300px]]
#Click on "Continue" to allow the installation.
#:[[File:Google sheets install Step2 cursor over Continue button.PNG|300x300px]]
#Click on "Allow" to complete the installation.
#:[[File:Google sheets install Step3 cursor over Allow button.PNG|300x300px]]
#Open the spreadsheet you want to sign in Google Sheets.
#Click on "Add-ons" near the top of the page, then "ScripTouch Sign and Save for Google Sheets", and then "Sign Spreadsheet".
#:[[File:Google sheets install Step5 cursor over Sign Document in menus.PNG|300x300px]]
#Once the application sidebar opens click on the "Click Here to Sign" button.
#:[[File:Google sheets install Step6 cursor over Click here to sign.PNG|300x300px]]
#Sign on your signature pad now. Be sure to press "OK" once you have finished signing.
#Click on the "ADD SIGNATURE" button below your signature. You may also change some aspects of the signature using the options below before adding.
#:[[File:Google sheets install Step8 cursor over add signature button.PNG|300x300px]]
#With the signature added to your document you may now re-position, by clicking and dragging, and resize the signature, by clicking and dragging the handles along the outside of the box, if necessary.
#:[[File:Google sheets install Step9A cursor over signature to reposition it.PNG|300x300px]]
#:[[File:Google sheets install Step9B cursor resizing signature.PNG|300x300px]]

File:Google sheets install Step9B cursor resizing signature.PNG

2017-05-23T15:05:15Z

Max Campbell:

File:Google sheets install Step9A cursor over signature to reposition it.PNG

2017-05-23T15:04:51Z

Max Campbell:

File:Google sheets install Step8 cursor over add signature button.PNG

2017-05-23T15:04:01Z

Max Campbell:

File:Google sheets install Step6 cursor over Click here to sign.PNG

2017-05-23T15:03:31Z

Max Campbell:

File:Google sheets install Step5 cursor over Sign Document in menus.PNG

2017-05-23T15:01:58Z

Max Campbell:

File:Google sheets install Step3 cursor over Allow button.PNG

2017-05-23T15:01:12Z

Max Campbell:

File:Google sheets install Step2 cursor over Continue button.PNG

2017-05-23T14:22:51Z

Max Campbell:

File:Google sheets install Step1 cursor over +FREE button.PNG

2017-05-23T14:22:23Z

Max Campbell:

ScripTouch Sign and Save for Google Sheets installation

2017-05-23T13:41:41Z

Max Campbell:

ScripTouch Sign and Save for Google Docs installation

2017-05-23T13:41:28Z

Max Campbell:

[[Category:ScripTouch Sign and Save]]
'''NOTE:''' If you have a '''[[ProScript]]''' interface (model number ending in a 0 or 5) you will also need to install the latest version of ScripTouch '''[[OmniScript]]''' which can be found on the '''[http://scriptel.com/support/downloads Scriptel Downloads page.]''' An installation guide for OmniScript can be found '''[[OmniScript installation|here.]]''' This does not apply to '''[[EasyScript]]''' interfaces (model numbers ending in 1 or 6).

<embedvideo service=youtube>https://www.youtube.com/watch?v=YA9SM2K2qTo</embedvideo>

#Navigate to the '''[https://chrome.google.com/webstore/detail/scriptouch-sign-and-save/hmfodceejedffnkaejcddclmnhcjenmo Google Add-on Store page]''' and click the "+FREE" button.
#:[[File:Google docs install Step1 cursor over +FREE button.PNG|300x300px]]
#Click on "Continue" to allow the installation.
#:[[File:Google docs install Step2 cursor over Continue button.PNG|300x300px]]
#Click on "Allow" to complete the installation.
#:[[File:Google docs install Step3 cursor over Allow button.PNG|300x300px]]
#Open the document you want to sign in Google Docs
#Click on "Add-ons" near the top of the page, then "ScripTouch Sign and Save for Google Docs", and then "Sign Document".
#:[[File:Google docs install Step5 cursor over Sign Document in menus.PNG|300x300px]]
#Once the application sidebar opens click on the "Click Here to Sign" button.
#:[[File:Google docs install Step6 cursor over Click here to sign.PNG|300x300px]]
#Sign on your signature pad now. Be sure to press "OK" once you have finished signing.
#Click on the "ADD SIGNATURE" button below your signature. You may also change some aspects of the signature using the options below before adding.
#:[[File:Google docs install Step8 cursor over add signature button.PNG|300x300px]]
#With the signature added to your document you may now re-position, by clicking and dragging, and resize the signature, by clicking and dragging the handles along the outside of the box, if necessary.
#:[[ File:Google docs install Step9A cursor over signature to reposition it.PNG|300x300px]]
#:[[File:Google docs install Step9B cursor resizing signature.PNG|300x300px]]

ScripTouch Sign and Save for Google Sheets installation

2017-05-23T13:41:04Z

Max Campbell:

ScripTouch Sign and Save for Google Sheets installation

2017-05-23T13:40:30Z

Max Campbell:

ScripTouch Sign and Save for Google Sheets installation

2017-05-23T13:38:30Z

Max Campbell: Created page with "Category:ScripTouch Sign and Save '''NOTE:''' If you have a '''ProScript''' interface (model number ending in a 0 or 5) you will also need to install the latest versio..."

Main Page

2017-05-15T13:30:25Z

Max Campbell: /* Software */

Scriptel Corporation was founded in 1982 and is based in Columbus, Ohio. The company quickly became the industry leader in digitizer components and electronic signature capture. In the late 80’s, Scriptel launched the PenWriter, the first computer peripheral that provided high quality pen input on a device with its own LCD display. For the first time, this allowed users to see and use their own handwriting on their computers.

Today, Scriptel Corporation is the leader in capacitive pen digitizing technology, a very durable and cost-effective way to electronically simulate pen and paper. The company holds many patents and has deployed its technology in over 3 million solutions used around the world, mostly in the demanding retail point-of-sale environment. Virtually everyone that used a credit card at major US retailers in the past decade has used a Scriptel pen many times.

Beginning in 2010, Scriptel entered the digital workflow market with the ScripTouch '''[[ST1500]]''', a dedicated electronic signature pad that provides high reliability with 3 year warranty, and has since launched a full line of ScripTouch signature pads that meet important market needs, backing these up with excellent service and software integration support.

In the summer of 2015, Scriptel achieved an important milestone. It launched its second generation '''[[EasyScript]]''' interface that adds signature data streaming and higher resolution for a better user experience to its highly successful "no client install" API for browser-based applications.

[[File:Scriptel_Corporation_Timeline.jpg|right]]

==[[Products]]==

===Hardware===

*'''[[ScripTouch Compact LCD Signature Pad]]'''

*'''[[ScripTouch Desktop 1×5 Signature Pad]]'''

*'''[[ScripTouch Desktop LCD Signature Pad]]'''

*'''[[ScripTouch Slimline 1×5 Signature Pad]]'''

*'''[[ScripTouch Magstripe LCD Signature Pad]]'''

*'''[[ScripTouch Slimline LCD Signature Pad]]'''

===Software===

*'''[[ProScript]]'''

*'''[[EasyScript]]'''

*'''[[OmniScript| ScripTouch OmniScript]]'''

*'''[[ScripTouch Remote]]'''

*'''[[ScripTouch Toolbox]]'''

*'''[[ScripTouch Sign and Save]]'''

*'''[[Scriptel mSign]]'''

*'''[[Sign and Save for Google Docs]]'''

*'''[[Sign and Save for Google Sheets]]'''

==Plugins==
*'''[[ScripTouch Adobe Plugin]]'''

*'''[[Epic Hyperspace Plugin]]'''

*'''[[Kofax SignDoc Plugin]]'''

*'''[[ScripTouch Excel Plugin]]'''

*'''[[ScripTouch Word Plugin]]'''

*'''[[ScripTouch OpenOffice Calc Plugin]]'''

*'''[[ScripTouch OpenOffice Writer Plugin]]'''

*'''[[ScripTouch TWAIN Plugin]]'''

*'''[[ScripTouch Assist]]'''

==ISV Partners==
*'''[[AVImark]]'''

*'''[[axiUm]]'''

*'''[[Brittco]]'''

*'''[[CrossLink]]'''

*'''[[DSI Solutions]]'''

*'''[[eClinicalWorks]]'''

*'''[[Ensoftek]]'''

*'''[[Epic Hyperspace]]'''

*'''[[Excercio]]'''

*'''[[Geist Interactive]]'''

*'''[[iPatientCare]]'''

*'''[[Kipu]]'''

*'''[[Kofax]]'''

*'''[[Real Vision Imaging]]'''

*'''[[Spruce Computer Systems]]'''

*'''[[Tritan Software]]'''

Main Page

2017-05-15T13:29:51Z

Max Campbell: /* Software */

Scriptel Corporation was founded in 1982 and is based in Columbus, Ohio. The company quickly became the industry leader in digitizer components and electronic signature capture. In the late 80’s, Scriptel launched the PenWriter, the first computer peripheral that provided high quality pen input on a device with its own LCD display. For the first time, this allowed users to see and use their own handwriting on their computers.

Today, Scriptel Corporation is the leader in capacitive pen digitizing technology, a very durable and cost-effective way to electronically simulate pen and paper. The company holds many patents and has deployed its technology in over 3 million solutions used around the world, mostly in the demanding retail point-of-sale environment. Virtually everyone that used a credit card at major US retailers in the past decade has used a Scriptel pen many times.

Beginning in 2010, Scriptel entered the digital workflow market with the ScripTouch '''[[ST1500]]''', a dedicated electronic signature pad that provides high reliability with 3 year warranty, and has since launched a full line of ScripTouch signature pads that meet important market needs, backing these up with excellent service and software integration support.

In the summer of 2015, Scriptel achieved an important milestone. It launched its second generation '''[[EasyScript]]''' interface that adds signature data streaming and higher resolution for a better user experience to its highly successful "no client install" API for browser-based applications.

[[File:Scriptel_Corporation_Timeline.jpg|right]]

==[[Products]]==

===Hardware===

*'''[[ScripTouch Compact LCD Signature Pad]]'''

*'''[[ScripTouch Desktop 1×5 Signature Pad]]'''

*'''[[ScripTouch Desktop LCD Signature Pad]]'''

*'''[[ScripTouch Slimline 1×5 Signature Pad]]'''

*'''[[ScripTouch Magstripe LCD Signature Pad]]'''

*'''[[ScripTouch Slimline LCD Signature Pad]]'''

===Software===

*'''[[ProScript]]'''

*'''[[EasyScript]]'''

*'''[[OmniScript| ScripTouch OmniScript]]'''

*'''[[ScripTouch Remote]]'''

*'''[[ScripTouch Toolbox]]'''

*'''[[ScripTouch Sign and Save]]'''

*'''[[Scriptel mSign]]'''

*'''[[Sign and Save for Google Docs]]'''

==Plugins==
*'''[[ScripTouch Adobe Plugin]]'''

*'''[[Epic Hyperspace Plugin]]'''

*'''[[Kofax SignDoc Plugin]]'''

*'''[[ScripTouch Excel Plugin]]'''

*'''[[ScripTouch Word Plugin]]'''

*'''[[ScripTouch OpenOffice Calc Plugin]]'''

*'''[[ScripTouch OpenOffice Writer Plugin]]'''

*'''[[ScripTouch TWAIN Plugin]]'''

*'''[[ScripTouch Assist]]'''

==ISV Partners==
*'''[[AVImark]]'''

*'''[[axiUm]]'''

*'''[[Brittco]]'''

*'''[[CrossLink]]'''

*'''[[DSI Solutions]]'''

*'''[[eClinicalWorks]]'''

*'''[[Ensoftek]]'''

*'''[[Epic Hyperspace]]'''

*'''[[Excercio]]'''

*'''[[Geist Interactive]]'''

*'''[[iPatientCare]]'''

*'''[[Kipu]]'''

*'''[[Kofax]]'''

*'''[[Real Vision Imaging]]'''

*'''[[Spruce Computer Systems]]'''

*'''[[Tritan Software]]'''

ScripTouch Sign and Save for Google Docs installation

2017-05-15T13:28:30Z

Max Campbell:

[[Category:ScripTouch Sign and Save]]
'''NOTE:''' If you have a '''[[ProScript]]''' interface (model number ending in a 0 or 5) you will also need to install the latest version of ScripTouch '''[[OmniScript]]''' which can be found on the '''[http://scriptel.com/support/downloads Scriptel Downloads page]''' .An installation guide for OmniScript can be found '''[[OmniScript installation|here]]'''. This does not apply to '''[[EasyScript]]''' interfaces (model numbers ending in 1 or 6).

<embedvideo service=youtube>https://www.youtube.com/watch?v=YA9SM2K2qTo</embedvideo>

#Navigate to the '''[https://chrome.google.com/webstore/detail/scriptouch-sign-and-save/hmfodceejedffnkaejcddclmnhcjenmo Google Add-on Store page]''' and click the "+FREE" button.
#:[[File:Google docs install Step1 cursor over +FREE button.PNG|300x300px]]
#Click on "Continue" to allow the installation.
#:[[File:Google docs install Step2 cursor over Continue button.PNG|300x300px]]
#Click on "Allow" to complete the installation.
#:[[File:Google docs install Step3 cursor over Allow button.PNG|300x300px]]
#Open the document you want to sign in Google Docs
#Click on "Add-ons" near the top of the page, then "ScripTouch Sign and Save for Google Docs", and then "Sign Document".
#:[[File:Google docs install Step5 cursor over Sign Document in menus.PNG|300x300px]]
#Once the application sidebar opens click on the "Click Here to Sign" button.
#:[[File:Google docs install Step6 cursor over Click here to sign.PNG|300x300px]]
#Sign on your signature pad now. Be sure to press "OK" once you have finished signing.
#Click on the "ADD SIGNATURE" button below your signature. You may also change some aspects of the signature using the options below before adding.
#:[[File:Google docs install Step8 cursor over add signature button.PNG|300x300px]]
#With the signature added to your document you may now re-position, by clicking and dragging, and resize the signature, by clicking and dragging the handles along the outside of the box, if necessary.
#:[[ File:Google docs install Step9A cursor over signature to reposition it.PNG|300x300px]]
#:[[File:Google docs install Step9B cursor resizing signature.PNG|300x300px]]

ScripTouch Assist

2017-05-10T13:37:58Z

Max Campbell: /* Installing the ScripTouch Assist Application */

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==

<embedvideo service=youtube>https://www.youtube.com/watch?v=q5atOCWw-C0</embedvideo>

#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Close”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''Data Compression:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. Ctrl, Alt, Shift etc.) On the right is the key itself, which you can define by entering it in the textbox then tapping it on the keyboard. It is set to Ctrl + Shift + P by default.
#:'''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

ScripTouch Assist

2017-05-08T15:40:16Z

Max Campbell: /* ScripTouch Assist Usage */

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Close”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''Data Compression:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. Ctrl, Alt, Shift etc.) On the right is the key itself, which you can define by entering it in the textbox then tapping it on the keyboard. It is set to Ctrl + Shift + P by default.
#:'''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

Installing Scriptel mSign Mobile on an iOS Device

2017-05-08T15:24:10Z

Max Campbell: /* Installing the Software */

==Before You Begin==

You will need:
*An IOS device running IOS version 6.0 or later (with Mobile Safari 6+).
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).

==Installing the Software==
#On your IOS device, open Safari and navigate to: '''[HTTP://msign.scriptel.com msign.scriptel.com]''' .
#You will want to add mSign to your home screen for frequent use. To do this, press the Action icon at the bottom of the screen and tap, '''“Add to Home Screen.”'''
#:[[File:MSign iOS install step 2A.PNG|300x300px]] [[File:MSign iOS install step 2B.PNG|300x300px]]
#Sign in to the mSign site using your Scriptel customer portal login credentials.
#:[[File:MSign iOS install step 3.PNG|300x300px]]
#Open the menu at the top left and select, '''“Pair with Desktop.”'''
#:[[File:MSign iOS install step 4.PNG|300x300px]]
#Back on your desktop, right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Mobile Device.”'''
#You will be shown a 9-digit pairing code and a QR code version. Enter the pairing code by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically. If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST 1550.”'''

You may now sign on your iOS device and the signature should appear in the Sign
and Save window.

===Note:===
The iOS version of mSign Mobile has a display that automatically rotates. If your phone is in portrait display, you will have a smaller width to sign with.

Installing Scriptel mSign Mobile on an iOS Device

2017-05-08T15:22:47Z

Max Campbell: /* Installing the Software */

==Before You Begin==

You will need:
*An IOS device running IOS version 6.0 or later (with Mobile Safari 6+).
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).

==Installing the Software==
#On your IOS device, open Safari and navigate to: '''[HTTP://msign.scriptel.com msign.scriptel.com]''' .
#You will want to add mSign to your home screen for frequent use. To do this, press the Action icon at the bottom of the screen and tap, '''“Add to Home Screen.”'''
#:[[File:MSign iOS install step 2A.PNG|300x300px]] [[File:MSign iOS install step 2B.PNG|300x300px]]
#Sign in to the mSign site using your Scriptel customer portal login credentials.
#:[[File:MSign iOS install step 3.PNG|300x300px]]
#Open the menu at the top left and select, '''“Pair with Desktop.”'''
#:[[File:MSign iOS install step 4.PNG|300x300px]]
#Back on your desktop, right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Mobile Device.”'''
#You will be shown a 9-digit pairing key and a QR code version. Scan the QR code or enter the key by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically. If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST 1550.”'''

You may now sign on your iOS device and the signature should appear in the Sign
and Save window.

===Note:===
The iOS version of mSign Mobile has a display that automatically rotates. If your phone is in portrait display, you will have a smaller width to sign with.

ScripTouch Assist

2017-05-08T14:44:38Z

Max Campbell: /* ScripTouch Assist Usage */

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Close”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''Data Compression:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. Ctrl, Alt, Shift etc.) On the right is the key itself, which you can define by entering it in the textbox then tapping it on the keyboard.
#:'''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

ScripTouch Assist

2017-05-08T14:43:10Z

Max Campbell: /* ScripTouch Assist Usage */

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Close”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''Data Compression:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. Ctrl, Alt, Shift etc.) On the right is the key itself, which you can define by entering it in the textbox and tapping it on the keyboard.
#:'''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

ScripTouch Assist

2017-05-08T14:42:03Z

Max Campbell: /* ScripTouch Assist Usage */

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Close”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''Data Compression:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. Ctrl, Alt, Shift etc.) On the right is the key itself, which you can define by entering it in the textbox or tapping it on the keyboard. '''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

ScripTouch Assist

2017-05-08T14:03:48Z

Max Campbell:

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Close”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#'''Data Compression:''' Turn on or off.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. CTRL, CTRL-ALT, etc.) On the right is the key itself, which you can define by entering it in the textbox or tapping it on the keyboard. '''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

ScripTouch Assist

2017-05-05T20:35:49Z

Max Campbell: /* ScripTouch Assist Status */

EasyScript 3.0 is the result of continued enhancements to Scriptel’s popular EasyScript API. EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

The latest version of EasyScript adds the ability for our EasyScript pads to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads with latest firmware can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 10
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Encrypted signatures
*Connect at USB level.

==Installing the ScripTouch Assist Application==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page].'''
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#After the installer file finishes downloading, run the installer.
#Read and agree to the End User License Agreement by checking the appropriate box.
#Click the '''“Install”''' button.
#After the installation finishes, click the '''“Finish”''' button.

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#'''Data Compression:''' Turn on or off.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. CTRL, CTRL-ALT, etc.) On the right is the key itself, which you can define by entering it in the textbox or tapping it on the keyboard. '''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

Main Page

2017-05-04T17:24:37Z

Max Campbell:

Scriptel Corporation was founded in 1982 and is based in Columbus, Ohio. The company quickly became the industry leader in digitizer components and electronic signature capture. In the late 80’s, Scriptel launched the PenWriter, the first computer peripheral that provided high quality pen input on a device with its own LCD display. For the first time, this allowed users to see and use their own handwriting on their computers.

Today, Scriptel Corporation is the leader in capacitive pen digitizing technology, a very durable and cost-effective way to electronically simulate pen and paper. The company holds many patents and has deployed its technology in over 3 million solutions used around the world, mostly in the demanding retail point-of-sale environment. Virtually everyone that used a credit card at major US retailers in the past decade has used a Scriptel pen many times.

Beginning in 2010, Scriptel entered the digital workflow market with the ScripTouch '''[[ST1500]]''', a dedicated electronic signature pad that provides high reliability with 3 year warranty, and has since launched a full line of ScripTouch signature pads that meet important market needs, backing these up with excellent service and software integration support.

In the summer of 2015, Scriptel achieved an important milestone. It launched its second generation '''[[EasyScript]]''' interface that adds signature data streaming and higher resolution for a better user experience to its highly successful "no client install" API for browser-based applications.

[[File:Scriptel_Corporation_Timeline.jpg|right]]

==[[Products]]==

===Hardware===

*'''[[ScripTouch Compact LCD Signature Pad]]'''

*'''[[ScripTouch Desktop 1×5 Signature Pad]]'''

*'''[[ScripTouch Desktop LCD Signature Pad]]'''

*'''[[ScripTouch Slimline 1×5 Signature Pad]]'''

*'''[[ScripTouch Magstripe LCD Signature Pad]]'''

*'''[[ScripTouch Slimline LCD Signature Pad]]'''

===Software===

*'''[[ProScript]]'''

*'''[[EasyScript]]'''

*'''[[OmniScript| ScripTouch OmniScript]]'''

*'''[[ScripTouch Remote]]'''

*'''[[ScripTouch Toolbox]]'''

*'''[[ScripTouch Sign and Save]]'''

*'''[[Scriptel mSign]]'''

==Plugins==
*'''[[ScripTouch Adobe Plugin]]'''

*'''[[Epic Hyperspace Plugin]]'''

*'''[[Kofax SignDoc Plugin]]'''

*'''[[ScripTouch Excel Plugin]]'''

*'''[[ScripTouch Word Plugin]]'''

*'''[[ScripTouch OpenOffice Calc Plugin]]'''

*'''[[ScripTouch OpenOffice Writer Plugin]]'''

*'''[[ScripTouch TWAIN Plugin]]'''

*'''[[ScripTouch Assist]]'''

==ISV Partners==
*'''[[AVImark]]'''

*'''[[axiUm]]'''

*'''[[Brittco]]'''

*'''[[CrossLink]]'''

*'''[[DSI Solutions]]'''

*'''[[eClinicalWorks]]'''

*'''[[Ensoftek]]'''

*'''[[Epic Hyperspace]]'''

*'''[[Excercio]]'''

*'''[[Geist Interactive]]'''

*'''[[iPatientCare]]'''

*'''[[Kipu]]'''

*'''[[Kofax]]'''

*'''[[Real Vision Imaging]]'''

*'''[[Spruce Computer Systems]]'''

*'''[[Tritan Software]]'''

Using Scriptel mSign Mobile in a web browser

2017-05-04T17:19:20Z

Max Campbell:

==Before You Begin==

You will need:
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*A current version of either Google Chrome or Mozilla Firefox.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).
*Either Google Chrome ver ??? or Mozilla Firefox ver ??? for Windows
==Installing the Software==
#Open your browser of chooice and navigate to: '''[HTTP://msign.scriptel.com msign.scriptel.com]''' .
#Sign in to the mSign site using your Scriptel customer portal login credentials.
#:[[File:MSign using browser step 2.PNG|300x300px]]
#Open the Options menu at the top left and select, '''“Pair with Desktop.”'''
#:[[File:MSign using browser step 3.PNG|300x300px]]
#Right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Mobile Device.”'''
#You will be shown a 9-digit pairing key and a QR code version. Scan the QR code or enter the key by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically.
#:If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST 1550.”'''

You may now sign in your browser and the signature should appear in the Sign and Save window.

Scriptel mSign

2017-05-04T17:18:21Z

Max Campbell: /* Installation */

{{Infobox software
| name = mSign
| logo = File:MSign Logo 2017.png
| logo alt = 192px
| screenshot = 
| caption =
| screenshot alt =
| collapsible =
| author =
| developer = [[Scriptel Corporation]]
| released = 
| discontinued =
| latest release version = {{#for_external_table: {{{versioninfo}}}}}
| latest release date = 
| latest preview version =
| latest preview date = 
| status =
| programming language =
| operating system = mSign Desktop app: Windows 7 - 10, mSign Mobile app: iOS and Android, mSign Server: Linux
| platform =
| size =
| language =
| language count = 
| language foot
| genre =
| license =
| alexa =
| website = {{URL|http://scriptel.com/products/msign/}}
| standard =
| AsOf =
}}

Scriptel mSign Mobile is a signature capture application for Android and iOS devices. Signatures can be captured through a supported mobile device and used to sign in any Scriptel-integrated application, such as the plugins for '''[[ScripTouch Adobe Plugin|Adobe PDFs]]''', '''[[ScripTouch Word Plugin|Word]]''' and '''[[ScripTouch Excel Plugin|Excel]]''' files, and '''[[Sign and Save for Google Docs|Google Docs]]''' and '''[[Sign and Save for Google Sheets|Sheets]]''', and software from third parties.

mSign acquired signatures contain all the data normally captured from ScripTouch® signature pads, while supporting color, different resolutions, sizes and aspect ratios.

Using our Scriptel server, signatures are encrypted and routed to any registered desktop device, while tracking the number of successful and unsuccessful signatures on a per organization basis. Organizations can use the Scriptel mSign Server app to add additional capacity to their environment.

Scriptel mSign consists of three components: the mSign Mobile app, the mSign Tray app and the mSign Server app.

The mSign Mobile app connects to '''[[ProScript]]''' and '''[[EasyScript]]''' interfaces as if it were a physical Scriptel ScripTouch ST1550 signature pad. mSign adds data beyond what our standard hardware pads capture, including color, and different resolutions and aspect ratios. More than one mSign device can be connected to a desktop and each device is encrypted in a way that cannot be decoded by the server.

The mSign Tray application is the front-end interface connecting an mSign Mobile device to an mSign server, whether the server is hosted by the customer or by Scriptel. Pairing is done by the mSign Tray application requesting a code from the server. Pairing is finalized when a human inputted code is entered or a QR code is scanned, allowing the mobile device to communicate with a server somewhere (defaults to Scriptel server). mSign Tray is licensed through the ScripTouch Remote™ licensing model.

The mSign Server application is for customers who wish to self-host instead of relying on Scriptel’s servers. mSign Server allows the customer to keep the signing process completely in their purview and may reduce latency by hosting closer to the signing process. The application tracks the number of successful and unsuccessful signatures (cancel, network error) signatures on a per organization level.

==System Requirements:==
*Windows 7 – 10
*Java 1.7+
*30 megabytes of hard disk space

==mSign Mobile App Key Features==
*Connects to Scriptel integrated software as a virtual Scriptel ScripTouch 1550/1551 signature pad.
*Android and iOS support.
*Enhanced mode supports features beyond normal ScripTouch devices (color, resolution, size, and aspect ratios).
*Simple and Enhanced modes
*Encrypted signatures
*Connect at USB level.

==mSign Tray App Key Features==
*Pairs with mobile device through the server.
*Pairs using text input or QR code.
*Monitor connection status

==Key Features mSign Server app==
*Available to customers who want to self-host.
*Supports additional capacity by adding servers in potentially different geographic regions.
*Tracks the number of successful and unsuccessful signatures on a per-organizational level.

==Summary Specifications==

{| class="wikitable"
|Product Type
|Electronic signature pad application for Android and iOS devices
|-
|Manufacturer
|[[Scriptel Corporation]]
|-
|Active Signature Area
|Customizable
|-
|Signature Display
|On user device
|-
|Pen Type
|Provided by customer
|-
|Data Interface
|USB layer
|-
|Thin Client / RDP
|
|-
|Operating Systems
|'''mSign Mobile''': iOS or Android. '''mSign Desktop''': Windows. '''mSign Server''': Linux.
|-
|Warranty
|
|-
|Data Protocol
|
|-
|Development Environments
|
|-
|Downloadable Software
|mSign Mobile, mSign Desktop, and ScripTouch Remote
|}

==Setting the Proper Mode==
The software you are trying to use will determine the proper mode for the mSign
virtual signature pad. Scriptel plugins can use any mode but we recommend trying
ProScript Compatible first. Third party plugins will vary.

*'''ProScript Compatible:''' ProScript Compatible mode sets the virtual pad to act just like a ScripTouch Compact LCD ST1550 signature pad.

*'''ProScript Enhanced:''' The ProScript Enhanced mode has a bigger signing area for larger devices, like an iPad. Additionally, it provides a higher resolution and the ability to push color images to the display.

*'''EasyScript Compatible:''' This mode provides EasyScript 1.0 protocol communication which is an uncompressed, batch mode. '''Note:''' No data is sent until “<OK>” is tapped on the pad.

*'''EasyScript Streaming:''' Communicating in the EasyScript 2.0 protocol, with EasyScript Streaming mode, data starts flowing as the signature is being written, allowing for real-time display in the Sign and Save application.

To change the mode, click the '''“Options”''' button at the top of the display.
Choose the '''“Current Mode”''' option and then select the mode: ProScript Compatible,
ProScript Enhanced, EasyScript Streaming, or EasyScript Compatible.

==Using a Private Server==
At the top of the mSign Mobile app display is the '''“Options”''' button. Touch this
to show the options for the app, and then select the Settings option. You will be able
to change which server your mobile app communicates with and you may also
change the label associated with the mSign Mobile device.

==Installation==
<embedvideo service=youtube>https://www.youtube.com/watch?v=uNg8yu-Pxg0</embedvideo>

*'''[[Installing Scriptel mSign Desktop Application]]'''
*'''[[Installing Scriptel mSign Mobile on an iOS Device]]'''
*'''[[Installing Scriptel mSign Mobile on an Android Device]]'''
*'''[[Using Scriptel mSign Mobile in a web browser]]'''

==How to Sign a Document==
Once the mSign Mobile app is connected to the server and the virtual pad’s mode is
chosen (e.g. ProScript Compatible, ProScript Enhanced, EasyScript Streaming, or
EasyScript Compatible), mSign will act as a normal signature pad.

*'''[[How to Sign an Adobe Acrobat/Reader Document]]'''
*'''[[How to Sign a Google Docs/Sheets file]]'''
*'''[[How to Sign a Microsoft Word/Excel Document]]'''

==FAQ==
'''[[Scriptel mSign FAQs]]'''

Main Page

2017-05-04T17:17:58Z

Max Campbell: /* Software */

Scriptel Corporation was founded in 1982 and is based in Columbus, Ohio. The company quickly became the industry leader in digitizer components and electronic signature capture. In the late 80’s, Scriptel launched the PenWriter, the first computer peripheral that provided high quality pen input on a device with its own LCD display. For the first time, this allowed users to see and use their own handwriting on their computers.

Today, Scriptel Corporation is the leader in capacitive pen digitizing technology, a very durable and cost-effective way to electronically simulate pen and paper. The company holds many patents and has deployed its technology in over 3 million solutions used around the world, mostly in the demanding retail point-of-sale environment. Virtually everyone that used a credit card at major US retailers in the past decade has used a Scriptel pen many times.

Beginning in 2010, Scriptel entered the digital workflow market with the ScripTouch '''[[ST1500]]''', a dedicated electronic signature pad that provides high reliability with 3 year warranty, and has since launched a full line of ScripTouch signature pads that meet important market needs, backing these up with excellent service and software integration support.

In the summer of 2015, Scriptel achieved an important milestone. It launched its second generation '''[[EasyScript]]''' interface that adds signature data streaming and higher resolution for a better user experience to its highly successful "no client install" API for browser-based applications.

[[File:Scriptel_Corporation_Timeline.jpg|right]]

==[[Products]]==

===Hardware===

*'''[[ScripTouch Compact LCD Signature Pad]]'''

*'''[[ScripTouch Desktop 1×5 Signature Pad]]'''

*'''[[ScripTouch Desktop LCD Signature Pad]]'''

*'''[[ScripTouch Slimline 1×5 Signature Pad]]'''

*'''[[ScripTouch Magstripe LCD Signature Pad]]'''

*'''[[ScripTouch Slimline LCD Signature Pad]]'''

===Software===

*'''[[ProScript]]'''

*'''[[EasyScript]]'''

*'''[[OmniScript| ScripTouch OmniScript]]'''

*'''[[ScripTouch Remote]]'''

*'''[[ScripTouch Toolbox]]'''

*'''[[ScripTouch Sign and Save]]'''

*'''[[Scriptel mSign]]'''

*'''[[ScripTouch Assist]]

==Plugins==
*'''[[ScripTouch Adobe Plugin]]'''

*'''[[Epic Hyperspace Plugin]]'''

*'''[[Kofax SignDoc Plugin]]'''

*'''[[ScripTouch Excel Plugin]]'''

*'''[[ScripTouch Word Plugin]]'''

*'''[[ScripTouch OpenOffice Calc Plugin]]'''

*'''[[ScripTouch OpenOffice Writer Plugin]]'''

*'''[[ScripTouch TWAIN Plugin]]'''

==ISV Partners==
*'''[[AVImark]]'''

*'''[[axiUm]]'''

*'''[[Brittco]]'''

*'''[[CrossLink]]'''

*'''[[DSI Solutions]]'''

*'''[[eClinicalWorks]]'''

*'''[[Ensoftek]]'''

*'''[[Epic Hyperspace]]'''

*'''[[Excercio]]'''

*'''[[Geist Interactive]]'''

*'''[[iPatientCare]]'''

*'''[[Kipu]]'''

*'''[[Kofax]]'''

*'''[[Real Vision Imaging]]'''

*'''[[Spruce Computer Systems]]'''

*'''[[Tritan Software]]'''

Scriptel mSign

2017-05-01T18:35:24Z

Max Campbell: /* Installation */

{{Infobox software
| name = mSign
| logo = File:MSign Logo 2017.png
| logo alt = 192px
| screenshot = 
| caption =
| screenshot alt =
| collapsible =
| author =
| developer = [[Scriptel Corporation]]
| released = 
| discontinued =
| latest release version = {{#for_external_table: {{{versioninfo}}}}}
| latest release date = 
| latest preview version =
| latest preview date = 
| status =
| programming language =
| operating system = mSign Desktop app: Windows 7 - 10, mSign Mobile app: iOS and Android, mSign Server: Linux
| platform =
| size =
| language =
| language count = 
| language foot
| genre =
| license =
| alexa =
| website = {{URL|http://scriptel.com/products/msign/}}
| standard =
| AsOf =
}}

Scriptel mSign Mobile is a signature capture application for Android and iOS devices. Signatures can be captured through a supported mobile device and used to sign in any Scriptel-integrated application, such as the plugins for '''[[ScripTouch Adobe Plugin|Adobe PDFs]]''', '''[[ScripTouch Word Plugin|Word]]''' and '''[[ScripTouch Excel Plugin|Excel]]''' files, and '''[[Sign and Save for Google Docs|Google Docs]]''' and '''[[Sign and Save for Google Sheets|Sheets]]''', and software from third parties.

mSign acquired signatures contain all the data normally captured from ScripTouch® signature pads, while supporting color, different resolutions, sizes and aspect ratios.

Using our Scriptel server, signatures are encrypted and routed to any registered desktop device, while tracking the number of successful and unsuccessful signatures on a per organization basis. Organizations can use the Scriptel mSign Server app to add additional capacity to their environment.

Scriptel mSign consists of three components: the mSign Mobile app, the mSign Tray app and the mSign Server app.

The mSign Mobile app connects to '''[[ProScript]]''' and '''[[EasyScript]]''' interfaces as if it were a physical Scriptel ScripTouch ST1550 signature pad. mSign adds data beyond what our standard hardware pads capture, including color, and different resolutions and aspect ratios. More than one mSign device can be connected to a desktop and each device is encrypted in a way that cannot be decoded by the server.

The mSign Tray application is the front-end interface connecting an mSign Mobile device to an mSign server, whether the server is hosted by the customer or by Scriptel. Pairing is done by the mSign Tray application requesting a code from the server. Pairing is finalized when a human inputted code is entered or a QR code is scanned, allowing the mobile device to communicate with a server somewhere (defaults to Scriptel server). mSign Tray is licensed through the ScripTouch Remote™ licensing model.

The mSign Server application is for customers who wish to self-host instead of relying on Scriptel’s servers. mSign Server allows the customer to keep the signing process completely in their purview and may reduce latency by hosting closer to the signing process. The application tracks the number of successful and unsuccessful signatures (cancel, network error) signatures on a per organization level.

==System Requirements:==
*Windows 7 – 10
*Java 1.7+
*30 megabytes of hard disk space

==mSign Mobile App Key Features==
*Connects to Scriptel integrated software as a virtual Scriptel ScripTouch 1550/1551 signature pad.
*Android and iOS support.
*Enhanced mode supports features beyond normal ScripTouch devices (color, resolution, size, and aspect ratios).
*Simple and Enhanced modes
*Encrypted signatures
*Connect at USB level.

==mSign Tray App Key Features==
*Pairs with mobile device through the server.
*Pairs using text input or QR code.
*Monitor connection status

==Key Features mSign Server app==
*Available to customers who want to self-host.
*Supports additional capacity by adding servers in potentially different geographic regions.
*Tracks the number of successful and unsuccessful signatures on a per-organizational level.

==Summary Specifications==

{| class="wikitable"
|Product Type
|Electronic signature pad application for Android and iOS devices
|-
|Manufacturer
|[[Scriptel Corporation]]
|-
|Active Signature Area
|Customizable
|-
|Signature Display
|On user device
|-
|Pen Type
|Provided by customer
|-
|Data Interface
|USB layer
|-
|Thin Client / RDP
|
|-
|Operating Systems
|'''mSign Mobile''': iOS or Android. '''mSign Desktop''': Windows. '''mSign Server''': Linux.
|-
|Warranty
|
|-
|Data Protocol
|
|-
|Development Environments
|
|-
|Downloadable Software
|mSign Mobile, mSign Desktop, and ScripTouch Remote
|}

==Setting the Proper Mode==
The software you are trying to use will determine the proper mode for the mSign
virtual signature pad. Scriptel plugins can use any mode but we recommend trying
ProScript Compatible first. Third party plugins will vary.

*'''ProScript Compatible:''' ProScript Compatible mode sets the virtual pad to act just like a ScripTouch Compact LCD ST1550 signature pad.

*'''ProScript Enhanced:''' The ProScript Enhanced mode has a bigger signing area for larger devices, like an iPad. Additionally, it provides a higher resolution and the ability to push color images to the display.

*'''EasyScript Compatible:''' This mode provides EasyScript 1.0 protocol communication which is an uncompressed, batch mode. '''Note:''' No data is sent until “<OK>” is tapped on the pad.

*'''EasyScript Streaming:''' Communicating in the EasyScript 2.0 protocol, with EasyScript Streaming mode, data starts flowing as the signature is being written, allowing for real-time display in the Sign and Save application.

To change the mode, click the '''“Options”''' button at the top of the display.
Choose the '''“Current Mode”''' option and then select the mode: ProScript Compatible,
ProScript Enhanced, EasyScript Streaming, or EasyScript Compatible.

==Using a Private Server==
At the top of the mSign Mobile app display is the '''“Options”''' button. Touch this
to show the options for the app, and then select the Settings option. You will be able
to change which server your mobile app communicates with and you may also
change the label associated with the mSign Mobile device.

==Installation==
<embedvideo service=youtube>https://www.youtube.com/watch?v=70fx_F4erBQ</embedvideo>

*'''[[Installing Scriptel mSign Desktop Application]]'''
*'''[[Installing Scriptel mSign Mobile on an iOS Device]]'''
*'''[[Installing Scriptel mSign Mobile on an Android Device]]'''
*'''[[Using Scriptel mSign Mobile in a web browser]]'''

==How to Sign a Document==
Once the mSign Mobile app is connected to the server and the virtual pad’s mode is
chosen (e.g. ProScript Compatible, ProScript Enhanced, EasyScript Streaming, or
EasyScript Compatible), mSign will act as a normal signature pad.

*'''[[How to Sign an Adobe Acrobat/Reader Document]]'''
*'''[[How to Sign a Google Docs/Sheets file]]'''
*'''[[How to Sign a Microsoft Word/Excel Document]]'''

==FAQ==
'''[[Scriptel mSign FAQs]]'''

Using Scriptel mSign Mobile in a web browser

2017-05-01T18:35:18Z

Max Campbell: Created page with "==Before You Begin== You will need: *An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''. *A current version of either Google Chrome or Mozilla Fir..."

==Before You Begin==

You will need:
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*A current version of either Google Chrome or Mozilla Firefox.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).

==Installing the Software==
#Open your browser of chooice and navigate to: '''[HTTP://msign.scriptel.com msign.scriptel.com]''' .
#Sign in to the mSign site using your Scriptel customer portal login credentials.
#:[[File:MSign using browser step 2.PNG|300x300px]]
#Open the Options menu at the top left and select, '''“Pair with Desktop.”'''
#:[[File:MSign using browser step 3.PNG|300x300px]]
#Right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Mobile Device.”'''
#You will be shown a 9-digit pairing key and a QR code version. Scan the QR code or enter the key by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically.
#:If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST 1550.”'''

You may now sign in your browser and the signature should appear in the Sign and Save window.

File:MSign using browser step 3.PNG

2017-05-01T18:33:08Z

Max Campbell:

File:MSign using browser step 2.PNG

2017-05-01T18:32:46Z

Max Campbell:

Installing Scriptel mSign Mobile on an iOS Device

2017-05-01T18:25:51Z

Max Campbell:

==Before You Begin==

You will need:
*An IOS device running IOS version 6.0 or later (with Mobile Safari 6+).
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).

==Installing the Software==
#On your IOS device, open Safari and navigate to: '''[HTTP://msign.scriptel.com msign.scriptel.com]''' .
#You will want to add mSign to your home screen for frequent use. To do this press the Action icon at the bottom of the screen and tap, '''“Add to Home Screen.”'''
#:[[File:MSign iOS install step 2A.PNG|300x300px]] [[File:MSign iOS install step 2B.PNG|300x300px]]
#Sign in to the mSign site using your Scriptel customer portal login credentials.
#:[[File:MSign iOS install step 3.PNG|300x300px]]
#Open the menu at the top left and select, '''“Pair with Desktop.”'''
#:[[File:MSign iOS install step 4.PNG|300x300px]]
#Back on your desktop, right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Mobile Device.”'''
#You will be shown a 9-digit pairing key and a QR code version. Scan the QR code or enter the key by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically. If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST 1550.”'''

You may now sign on your iOS device and the signature should appear in the Sign
and Save window.

===Note:===
The iOS version of mSign Mobile has a display that automatically rotates. If your phone is in portrait display, you will have a smaller width to sign with.

Installing Scriptel mSign Mobile on an iOS Device

2017-05-01T15:37:52Z

Max Campbell: /* Installing the Software */

==Before You Begin==

You will need:
*An IOS device running IOS version 6.0 or later (with Mobile Safari 6+).
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).

==Installing the Software==
#On your IOS device, open Safari and navigate to: '''[HTTP://msign.scriptel.com msign.scriptel.com]''' .
#You will want to add mSign to your home screen for frequent use. To do this press the Action icon at the bottom of the screen and tap, '''“Add to Home Screen.”'''
#:[[File:MSign iOS install step 2A.PNG|300x300px]] [[File:MSign iOS install step 2B.PNG|300x300px]]
#Sign in to the mSign site using your Scriptel customer portal login credentials.
#:[[File:MSign iOS install step 3.PNG|300x300px]]
#Open the menu at the top left and select, '''“Pair with Device.”'''
#:[[File:MSign iOS install step 4.PNG|300x300px]]
#Back on your desktop, right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Desktop.”'''
#You will be shown a 9-digit pairing key and a QR code version. Scan the QR code or enter the key by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically. If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST 1550.”'''

You may now sign on your iOS device and the signature should appear in the Sign
and Save window.

===Note:===
The iOS version of mSign Mobile has a display that automatically rotates. If your phone is in portrait display, you will have a smaller width to sign with.

File:MSign iOS install step 4.PNG

2017-05-01T15:36:19Z

Max Campbell:

File:MSign iOS install step 3.PNG

2017-05-01T15:35:56Z

Max Campbell:

File:MSign iOS install step 2B.PNG

2017-05-01T15:26:43Z

Max Campbell:

File:MSign iOS install step 2A.PNG

2017-05-01T15:26:05Z

Max Campbell:

Installing Scriptel mSign Mobile on an Android Device

2017-05-01T15:15:21Z

Max Campbell:

==Before You Begin==

You will need:
*An Android device running version 4.10 (Jelly Bean) or later.
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).
*Scriptel mSign Desktop installed and running on a desktop (or laptop) computer. (see our guide on '''[[Installing Scriptel mSign Desktop Application]]''' if you require assistance).

==Installing the Software==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page]'''
#Click the '''"Download Now"''' button for '''Scriptel mSign Mobile for Android'''. After the installer finishes downloading, run the installer.
#:[[File:MSign Android install step 2.PNG|300x300px]]
#Sign in to the mSign application using your Scriptel customer portal login credentials.
#:[[File:MSign Android install step 3.PNG|300x300px]]
#Open the menu at the top left of the page and select, '''“Pair with Desktop.”'''
#:[[File:MSign Android install step 4.PNG|300x300px]]
#Back on your desktop, right-click on the mSign icon in the notification area of your taskbar and select, '''“Pair with Mobile Device.”'''
#You will be shown a 9-digit pairing key and a QR code version. Scan the QR code or enter the key by hand.
#Open ScripTouch Sign and Save. In the bottom left of the window, you should see a green square which lets you know that it connected automatically. If it hasn’t, choose '''File > Connect''' and select '''“ScripTouch ST1550.”'''

You may now sign on your Android device and the signature should appear in the
Sign and Save window.

File:MSign Android install step 4.PNG

2017-05-01T15:14:20Z

Max Campbell:

File:MSign Android install step 3.PNG

2017-05-01T15:13:56Z

Max Campbell:

File:MSign Android install step 2.PNG

2017-05-01T15:12:21Z

Max Campbell:

Installing Scriptel mSign Desktop Application

2017-05-01T15:09:03Z

Max Campbell:

==Before You Begin==

You will need:
*An account on the '''[http://scriptel.com/portal/ Scriptel customer portal]'''.
*ScripTouch Sign and Save installed (see our guide on '''[[ScripTouch Sign and Save installation]]''' if you require assistance).

==Installing the Software==
#Open a browser and navigate to '''[http://scriptel.com/support/downloads Scriptel Downloads page]'''
#Click the '''"Download Now"''' button for '''Scriptel mSign Desktop'''. After the installer finishes downloading, run the installer.
#:[[File:MSign desktop install step 2.PNG|300x300px]]
#When presented with the End User License Agreement, check the box for ''“I agree to the license terms and conditions”'' and click the '''“Install”''' button.
#:[[File:MSign desktop install step 3.PNG|300x300px]]
#The application will ask for your Scriptel customer portal account information.
#After providing your account credentials, a 90-day trial license will be created. Confirm this by clicking '''“OK.”'''
#In the notification area of the taskbar (near the clock on the right-hand side), a round, gray button will be displayed.
#:*''Gray'' indicates mSign Desktop could not connect to an mSign mobile device and mSign server.
#:*A ''green'' button means mSign Desktop is paired with the server and an mSign mobile device.
#If you have a device running mSign Mobile available, right-click on the button and select '''“Pair with Mobile Device,”''' in the context menu. You will be shown a 9-digit pairing key and a QR code.
#:[[File:MSign desktop install step 7.PNG|300x300px]]
#Either scan the QR code or enter the key by hand to pair your mSign Mobile device to your server through the mSign Desktop application. The button in the notification area should turn green.

===Note:===
Scriptel mSign does not work in a XenApp environment. It will work in other virtual desktop environments, such as XenDesktop and RDP, but only when it is installed on the the virtual desktop not the endpoint.

File:MSign desktop install step 7.PNG

2017-05-01T15:06:59Z

Max Campbell:

File:MSign desktop install step 3.PNG

2017-05-01T15:05:20Z

Max Campbell: Max Campbell uploaded a new version of File:MSign desktop install step 3.PNG

File:MSign desktop install step 2.PNG

2017-05-01T15:01:46Z

Max Campbell: Max Campbell uploaded a new version of File:MSign desktop install step 2.PNG