Scriptel Wiki - User contributions [en]

ScripTouch Assist

2025-12-19T20:57:17Z

John Powers:

{{Infobox software
| title = ScripTouch Assist
| logo = [[File:Assist-Wiki-Logo-2022.jpg|300px|center]]
| logo caption =
| logo alt =
| logo size =
| collapsible = 
| screenshot = 
| screenshot size =
| screenshot alt =
| caption =
| other_names =
| author =
| developer = [[Scriptel Corporation]]
| released = 
| ver layout = 
| discontinued = 
| latest release version =
| latest release date = 
| latest preview version =
| latest preview date = 
| repo =
| qid =
| programming language =
| middleware =
| engine =
| operating system =
| platform =
| included with =
| replaces =
| replaced_by =
| service_name =
| size =
| standard =
| language =
| language count =
| language footnote =
| genre =
| license =
| website = https://scriptel.com
| AsOf =
| games list =
}}
EasyScript enables simple plug and play, no-client-install capability with a signature pad. It is an ideal solution for browser-based applications that want cross-platform, cross-browser compatibility and no installed software maintenance headaches.

EasyScript pads are able to switch between EasyScript mode and ProScript mode with a simple click using the '''ScripTouch Assist''' taskbar application. EasyScript signature pads (V4.0+) can operate with applications using either our EasyScript or ProScript APIs.

==System Requirements:==
*Windows 7 – 11
*Java 1.6+
*20 megabytes of hard disk space

==Software Key Features==
ScripTouch Assist gives you access to the newest features of the EasyScript API:
*Change between '''[[EasyScript]]''' and '''[[ProScript]]''' protocols on the pad.
*In EasyScript modes, turn data streaming on or off.
*In EasyScript modes, turn data compression on or off.
*Change the hotkey for ScripTouch Assist.
*Connect at USB level.
*'''[[Interface Switching|Switch between signature pad interfaces]]'''.
==Video Tutorial==

<embedvideo service="youtube">https://www.youtube.com/watch?v=1vnpwVIYADk</embedvideo>
'''Installing and Using ScripTouch Assist Tutorial'''

==Instructions==

How to install ScripTouch Assist, a free A helper app for the ScripTouch EasyScript 3.0 AP.

'''Video instructions follow:'''

#Open a browser and navigate to: '''https://scriptel.com/support/downloads/'''.
#:<div style="padding:1rem;">[[File:Assist Install Step 1 .png|300x300px]]</div>
#Scroll down the page and click the '''"Download Now"''' button for ScripTouch Assist.
#:<div style="padding:1rem;">[[File:Assist Install Step 2.png|300x300px]]</div>
#Once the download finishes, run the installer.
#Read and agree to the End-User License Agreement, then click '''"Install."'''
#:<div style="padding:1rem;">[[File:Assist Install Step 4.png|300x300px]]</div>
#The User Account Control dialog may appear. If it does, click “Yes.”
#:<div style="padding:1rem;">[[File:Assist Install Step 6.png|300x300px]]</div>
#Once fully installed, launch '''ScripTouch Assist'''.

Look in the notification area of your computer's taskbar for one of these icons:

*The default icon indicates that ''ScripTouch Assist'' is not connected to any pad.

*A circle with a white '''"E,"''' means that a pad is connected and currently in EasyScript mode.

*A circle with a black '''"P,"''' means that a pad is connected and currently in ProScript mode.

Press '''CTRL + SHIFT + P''' to toggle between ''EasyScript'' and ''ProScript.''

This hotkey can be changed by clicking the taskbar icon and selecting '''"Change Hotkey."'''

==ScripTouch Assist as a Startup Program==
By default, Scriptel Assist is set to be a startup program. This means that every time your computer is started, the Scriptel Assist application will start running in the background, ready for you to use. Some users who only use their signature pad occasionally may not need this functionality and would prefer to run ScripTouch Assist only when they need to.

'''To remove ScripTouch Assist from the list of startup programs, follow these steps:'''
#Right-click on the Taskbar and select '''“Task Manager”''' in the popup window.
#Click the '''“Startup”''' tab. This tab displays all programs that start with Windows. To prevent ScripTouch Assist from starting when Windows starts, right-click on the program and select '''“Disable”''' from the popup menu.
#:'''NOTE:''' If you do not see the '''“Startup”''' tab, you may need to click on '''"More details"''' at the bottom of the Task Manager window.

Now when you wish to run ScripTouch Assist, you can double-click the desktop
icon or open it from the Start menu where it will be grouped with other Scriptel
Corporation software.

==ScripTouch Assist Status==
To verify that ScripTouch Assist is running, look in the notification area of your computer’s taskbar for the ScripTouch Assist icon.

[[File:ST Assist-Tray.png]]
The default icon indicates that ScripTouch Assist is not connected to any pad.

[[File:ST Assist-EasyScript-White-Tray.png]]
A circle with an '''“E,”''' means that the connected pad is in EasyScript mode.

[[File:ST Assist-ProScript-Tray.png]]
A circle with a '''“P,”''' means that the connected pad is in ProScript mode.

==ScripTouch Assist Usage==
To open the ScripTouch Assist menu, click on its icon in the notification area of your computer’s taskbar. The options are (from top to bottom):

#Your '''Connection.'''
#'''Devices:''' Displays a list of devices connected to your computer. Choosing a device connects it to this application.
#'''[[Interface Switching]]:''' The third line shows the opposite name of the protocol you are currently using, allowing you to switch by just clicking on it.
#'''Data Streaming:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''Data Compression:''' Turn on or off.
#:'''NOTE:''' This option will only be available if your device's default mode is Easyscript.
#'''About:''' Will display the information for App Version, Library, Wrapper, Platform, and Architecture.
#'''Change Hotkey:''' Set a different keyboard shortcut for starting ScripTouch Assist. On the left of the display are the modifiers you can choose, (e.g. Ctrl, Alt, Shift etc.) On the right is the key itself, which you can define by entering it in the textbox then tapping it on the keyboard. It is set to Ctrl + Shift + P by default.
#:'''Note:''' When you use your defined hotkey, ScripTouch Assist will start whenever it is pressed, no matter what else is happening so choose a hotkey that isn’t used by any of your other applications.
#'''Quit'''

==Warning:==
*ProScript modes do not offer data streaming or data compression options.
*If the signature pad loses power, its options will revert to its default mode. Future versions of ScripTouch Toolbox will allow you to change the default mode of any EasyScript 3.0 enabled ScripTouch pad.

STC1160 Review Quick Start Guide

2025-11-12T21:22:32Z

John Powers: /* Installing the software */

== Attaching the hardware ==

# Unbox the tablet and components.
# One end of the cable has an HDMI connector and 2 USB connectors. The other end has only an HDMI connector. Turn the tablet face down and connect that end to the tablet. <br />[[FILE:Review_attach_HDMI.jpg|200px]]
# Using the metal cover, secure the HDMI connector in place with the 2 provided screws.<br /> [[FILE:Review HDMI cover.jpg|200px]]
# Connect the other HDMI connector and the black USB connector to the computer. The computer may be able to sufficiently power the tablet through the black USB connector, or it may not. If not, plug the red USB connector into another USB port. If the tablet's display steadily shows your desktop, it's good.<br /> [[FILE:Review_HDMI_USBs.jpg|200px]]
# If this is still not enough to power the tablet, unplug the red USB connector and plug it into the included USB power supply and plug that into a wall outlet.<br />[[FILE:Tablet_external_powers.jpg|200px]]
# You may attach the stylus (pen) with the included lanyard to the tablet. There is an attachment point on the right side, near the rear of the tablet.

== Installing the software ==

These steps need to be performed on the Windows computer into which the Review tablet is physically connected.

* From the [https://scriptel.com/support/downloads/ downloads page], download ReviewHub
* Run the installer.
* If you get a message box asking
* Click [Install]. If asked, "Do you want to allow this app to make changes to your computer", click <Yes>.
* On the Welcome to the ReviewHub Setup Wizard, click <Next>.
* Read and accept the terms by putting a check mark in the checkbox and clicking <Next>
* On the destination folder window you can use the default or select a new location and click <Next>.
* Click <Install>, then <Finish>.
Review hub is now installed. Now you have to allow the installation of PenManager.
* The pen manager software (3 birds icon) will now pop up. Pick your language and click <OK> and <Install>.
* Click <OK> on the Pen Manager license agreement.
* You will be asked if you want to restart your computer. You do not need to do this. Click <Restart Later>.
* Click <Close>
* If your Review signature tablet is not plugged into your system. Do that now.

ReviewHub and Pen Manager are now installed. If you rebooted, PenManager will automatically start and be present in the System Tray. If you have not rebooted and don't wish to before you use PenManager, start it manually by typing into the Windows search box "Pen Manager". When you see it, click it. It will now be running in the system tray.

== Configure Monitor Mapping ==
With the Review pad plugged in and showing a Windows desktop,
# Open Display Settings, Extend the Desktop, and arrange the displays.
## On the desktop, right-click to open the menu, then left-click on Display Settings.
## Click Identify and note the identity of each monitor, especially the Review Tablet.
## The button to the right of Identify may say Duplicate These Displays. If it does, click it and change it to Extend these Displays.
## Arrange the displays the way you have the monitors arranged in real life. Do this by dragging and dropping the displays until you have them the way you want them.
## Note the number of the tablet. You can always click Identify again.
## Close Display Settings.
# Launch the ViewSonic Pen Manager application.
# Open the ViewSonic Pen Manager. <br /> [[FILE:ViewSonic_Pen_Manager.png]]
# Select the Mapping tab.

You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad.

[[File:Review Mapper, wrong.png]]

In the picture, the screen on the right is selected. This is the main screen, not the Review Screen, so it is wrong. To correct it, select Monitor number associated with the Review tablet. The default in Pen Manager is 2, but Review will not always be monitor 2. You must find the Review by remembering it from the instructions above or by matching what is on its screen with what is shown on the Mapping tab. Once this is done, you can close the application.

If it is right, the cursor will follow the pen on the Review screen. If the wrong monitor is set, the pen will place and move the cursor on a monitor other than the Review tablet.

== Citrix considerations ==

'''tl;dr''' - Make sure that VID 18fb and PID 1005 are allowed through the Citrix virtual channel '''AND''' PID 1001 is explicitly blocked (black listed).

Detail: The Review tablet communicates with the host through USB. USB has a Vendor Id (VID) and Product Id (PID). The Review tablet's VID is 18fb and VID 1001. When using the tablet with the ReviewHub software, which makes the tablet compatible with Scriptel's ProScript interface, it is ReviewHub that the application needs to communicate with. If PID 1001 is forwarded to the Citrix VDA, then ReviewHub software cannot capture the data. ReviewHub software forwards the data in ProScript format on PID 1005. So, PID 1001 must be blocked from being forwarded while PID 1005 must be forwarded.

STC1160 Review Quick Start Guide

2025-11-12T21:21:25Z

John Powers: /* Installing the software */

== Attaching the hardware ==

# Unbox the tablet and components.
# One end of the cable has an HDMI connector and 2 USB connectors. The other end has only an HDMI connector. Turn the tablet face down and connect that end to the tablet. <br />[[FILE:Review_attach_HDMI.jpg|200px]]
# Using the metal cover, secure the HDMI connector in place with the 2 provided screws.<br /> [[FILE:Review HDMI cover.jpg|200px]]
# Connect the other HDMI connector and the black USB connector to the computer. The computer may be able to sufficiently power the tablet through the black USB connector, or it may not. If not, plug the red USB connector into another USB port. If the tablet's display steadily shows your desktop, it's good.<br /> [[FILE:Review_HDMI_USBs.jpg|200px]]
# If this is still not enough to power the tablet, unplug the red USB connector and plug it into the included USB power supply and plug that into a wall outlet.<br />[[FILE:Tablet_external_powers.jpg|200px]]
# You may attach the stylus (pen) with the included lanyard to the tablet. There is an attachment point on the right side, near the rear of the tablet.

== Installing the software ==

If using with Citrix, these install steps need to be performed on the Citrix end point.

* From the [https://scriptel.com/support/downloads/ downloads page], download ReviewHub
* Run the installer.
* If you get a message box asking
* Click [Install]. If asked, "Do you want to allow this app to make changes to your computer", click <Yes>.
* On the Welcome to the ReviewHub Setup Wizard, click <Next>.
* Read and accept the terms by putting a check mark in the checkbox and clicking <Next>
* On the destination folder window you can use the default or select a new location and click <Next>.
* Click <Install>, then <Finish>.
Review hub is now installed. Now you have to allow the installation of PenManager.
* The pen manager software (3 birds icon) will now pop up. Pick your language and click <OK> and <Install>.
* Click <OK> on the Pen Manager license agreement.
* You will be asked if you want to restart your computer. You do not need to do this. Click <Restart Later>.
* Click <Close>
* If your Review signature tablet is not plugged into your system. Do that now.

ReviewHub and Pen Manager are now installed. If you rebooted, PenManager will automatically start and be present in the System Tray. If you have not rebooted and don't wish to before you use PenManager, start it manually by typing into the Windows search box "Pen Manager". When you see it, click it. It will now be running in the system tray.

== Configure Monitor Mapping ==
With the Review pad plugged in and showing a Windows desktop,
# Open Display Settings, Extend the Desktop, and arrange the displays.
## On the desktop, right-click to open the menu, then left-click on Display Settings.
## Click Identify and note the identity of each monitor, especially the Review Tablet.
## The button to the right of Identify may say Duplicate These Displays. If it does, click it and change it to Extend these Displays.
## Arrange the displays the way you have the monitors arranged in real life. Do this by dragging and dropping the displays until you have them the way you want them.
## Note the number of the tablet. You can always click Identify again.
## Close Display Settings.
# Launch the ViewSonic Pen Manager application.
# Open the ViewSonic Pen Manager. <br /> [[FILE:ViewSonic_Pen_Manager.png]]
# Select the Mapping tab.

You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad.

[[File:Review Mapper, wrong.png]]

In the picture, the screen on the right is selected. This is the main screen, not the Review Screen, so it is wrong. To correct it, select Monitor number associated with the Review tablet. The default in Pen Manager is 2, but Review will not always be monitor 2. You must find the Review by remembering it from the instructions above or by matching what is on its screen with what is shown on the Mapping tab. Once this is done, you can close the application.

If it is right, the cursor will follow the pen on the Review screen. If the wrong monitor is set, the pen will place and move the cursor on a monitor other than the Review tablet.

== Citrix considerations ==

'''tl;dr''' - Make sure that VID 18fb and PID 1005 are allowed through the Citrix virtual channel '''AND''' PID 1001 is explicitly blocked (black listed).

Detail: The Review tablet communicates with the host through USB. USB has a Vendor Id (VID) and Product Id (PID). The Review tablet's VID is 18fb and VID 1001. When using the tablet with the ReviewHub software, which makes the tablet compatible with Scriptel's ProScript interface, it is ReviewHub that the application needs to communicate with. If PID 1001 is forwarded to the Citrix VDA, then ReviewHub software cannot capture the data. ReviewHub software forwards the data in ProScript format on PID 1005. So, PID 1001 must be blocked from being forwarded while PID 1005 must be forwarded.

STC1160 Review Quick Start Guide

2025-11-12T21:19:55Z

John Powers: /* Citrix considerations */

== Attaching the hardware ==

# Unbox the tablet and components.
# One end of the cable has an HDMI connector and 2 USB connectors. The other end has only an HDMI connector. Turn the tablet face down and connect that end to the tablet. <br />[[FILE:Review_attach_HDMI.jpg|200px]]
# Using the metal cover, secure the HDMI connector in place with the 2 provided screws.<br /> [[FILE:Review HDMI cover.jpg|200px]]
# Connect the other HDMI connector and the black USB connector to the computer. The computer may be able to sufficiently power the tablet through the black USB connector, or it may not. If not, plug the red USB connector into another USB port. If the tablet's display steadily shows your desktop, it's good.<br /> [[FILE:Review_HDMI_USBs.jpg|200px]]
# If this is still not enough to power the tablet, unplug the red USB connector and plug it into the included USB power supply and plug that into a wall outlet.<br />[[FILE:Tablet_external_powers.jpg|200px]]
# You may attach the stylus (pen) with the included lanyard to the tablet. There is an attachment point on the right side, near the rear of the tablet.

== Installing the software ==

* From the [https://scriptel.com/support/downloads/ downloads page], download ReviewHub
* Run the installer.
* If you get a message box asking
* Click [Install]. If asked, "Do you want to allow this app to make changes to your computer", click <Yes>.
* On the Welcome to the ReviewHub Setup Wizard, click <Next>.
* Read and accept the terms by putting a check mark in the checkbox and clicking <Next>
* On the destination folder window you can use the default or select a new location and click <Next>.
* Click <Install>, then <Finish>.
Review hub is now installed. Now you have to allow the installation of PenManager.
* The pen manager software (3 birds icon) will now pop up. Pick your language and click <OK> and <Install>.
* Click <OK> on the Pen Manager license agreement.
* You will be asked if you want to restart your computer. You do not need to do this. Click <Restart Later>.
* Click <Close>
* If your Review signature tablet is not plugged into your system. Do that now.

ReviewHub and Pen Manager are now installed. If you rebooted, PenManager will automatically start and be present in the System Tray. If you have not rebooted and don't wish to before you use PenManager, start it manually by typing into the Windows search box "Pen Manager". When you see it, click it. It will now be running in the system tray.

== Configure Monitor Mapping ==
With the Review pad plugged in and showing a Windows desktop,
# Open Display Settings, Extend the Desktop, and arrange the displays.
## On the desktop, right-click to open the menu, then left-click on Display Settings.
## Click Identify and note the identity of each monitor, especially the Review Tablet.
## The button to the right of Identify may say Duplicate These Displays. If it does, click it and change it to Extend these Displays.
## Arrange the displays the way you have the monitors arranged in real life. Do this by dragging and dropping the displays until you have them the way you want them.
## Note the number of the tablet. You can always click Identify again.
## Close Display Settings.
# Launch the ViewSonic Pen Manager application.
# Open the ViewSonic Pen Manager. <br /> [[FILE:ViewSonic_Pen_Manager.png]]
# Select the Mapping tab.

You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad.

[[File:Review Mapper, wrong.png]]

In the picture, the screen on the right is selected. This is the main screen, not the Review Screen, so it is wrong. To correct it, select Monitor number associated with the Review tablet. The default in Pen Manager is 2, but Review will not always be monitor 2. You must find the Review by remembering it from the instructions above or by matching what is on its screen with what is shown on the Mapping tab. Once this is done, you can close the application.

If it is right, the cursor will follow the pen on the Review screen. If the wrong monitor is set, the pen will place and move the cursor on a monitor other than the Review tablet.

== Citrix considerations ==

'''tl;dr''' - Make sure that VID 18fb and PID 1005 are allowed through the Citrix virtual channel '''AND''' PID 1001 is explicitly blocked (black listed).

Detail: The Review tablet communicates with the host through USB. USB has a Vendor Id (VID) and Product Id (PID). The Review tablet's VID is 18fb and VID 1001. When using the tablet with the ReviewHub software, which makes the tablet compatible with Scriptel's ProScript interface, it is ReviewHub that the application needs to communicate with. If PID 1001 is forwarded to the Citrix VDA, then ReviewHub software cannot capture the data. ReviewHub software forwards the data in ProScript format on PID 1005. So, PID 1001 must be blocked from being forwarded while PID 1005 must be forwarded.

STC1160 Review Quick Start Guide

2025-11-12T21:19:38Z

John Powers: /* Citrix considerations */

== Attaching the hardware ==

# Unbox the tablet and components.
# One end of the cable has an HDMI connector and 2 USB connectors. The other end has only an HDMI connector. Turn the tablet face down and connect that end to the tablet. <br />[[FILE:Review_attach_HDMI.jpg|200px]]
# Using the metal cover, secure the HDMI connector in place with the 2 provided screws.<br /> [[FILE:Review HDMI cover.jpg|200px]]
# Connect the other HDMI connector and the black USB connector to the computer. The computer may be able to sufficiently power the tablet through the black USB connector, or it may not. If not, plug the red USB connector into another USB port. If the tablet's display steadily shows your desktop, it's good.<br /> [[FILE:Review_HDMI_USBs.jpg|200px]]
# If this is still not enough to power the tablet, unplug the red USB connector and plug it into the included USB power supply and plug that into a wall outlet.<br />[[FILE:Tablet_external_powers.jpg|200px]]
# You may attach the stylus (pen) with the included lanyard to the tablet. There is an attachment point on the right side, near the rear of the tablet.

== Installing the software ==

* From the [https://scriptel.com/support/downloads/ downloads page], download ReviewHub
* Run the installer.
* If you get a message box asking
* Click [Install]. If asked, "Do you want to allow this app to make changes to your computer", click <Yes>.
* On the Welcome to the ReviewHub Setup Wizard, click <Next>.
* Read and accept the terms by putting a check mark in the checkbox and clicking <Next>
* On the destination folder window you can use the default or select a new location and click <Next>.
* Click <Install>, then <Finish>.
Review hub is now installed. Now you have to allow the installation of PenManager.
* The pen manager software (3 birds icon) will now pop up. Pick your language and click <OK> and <Install>.
* Click <OK> on the Pen Manager license agreement.
* You will be asked if you want to restart your computer. You do not need to do this. Click <Restart Later>.
* Click <Close>
* If your Review signature tablet is not plugged into your system. Do that now.

ReviewHub and Pen Manager are now installed. If you rebooted, PenManager will automatically start and be present in the System Tray. If you have not rebooted and don't wish to before you use PenManager, start it manually by typing into the Windows search box "Pen Manager". When you see it, click it. It will now be running in the system tray.

== Configure Monitor Mapping ==
With the Review pad plugged in and showing a Windows desktop,
# Open Display Settings, Extend the Desktop, and arrange the displays.
## On the desktop, right-click to open the menu, then left-click on Display Settings.
## Click Identify and note the identity of each monitor, especially the Review Tablet.
## The button to the right of Identify may say Duplicate These Displays. If it does, click it and change it to Extend these Displays.
## Arrange the displays the way you have the monitors arranged in real life. Do this by dragging and dropping the displays until you have them the way you want them.
## Note the number of the tablet. You can always click Identify again.
## Close Display Settings.
# Launch the ViewSonic Pen Manager application.
# Open the ViewSonic Pen Manager. <br /> [[FILE:ViewSonic_Pen_Manager.png]]
# Select the Mapping tab.

You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad.

[[File:Review Mapper, wrong.png]]

In the picture, the screen on the right is selected. This is the main screen, not the Review Screen, so it is wrong. To correct it, select Monitor number associated with the Review tablet. The default in Pen Manager is 2, but Review will not always be monitor 2. You must find the Review by remembering it from the instructions above or by matching what is on its screen with what is shown on the Mapping tab. Once this is done, you can close the application.

If it is right, the cursor will follow the pen on the Review screen. If the wrong monitor is set, the pen will place and move the cursor on a monitor other than the Review tablet.

== Citrix considerations ==

'''tl;dr''' - Make sure that VID 18fb and PID 1005 are allowed through the Citrix virtual channel '''AND''' PID 1001 is explicitly blocked (black listed).

The Review tablet communicates with the host through USB. USB has a Vendor Id (VID) and Product Id (PID). The Review tablet's VID is 18fb and VID 1001. When using the tablet with the ReviewHub software, which makes the tablet compatible with Scriptel's ProScript interface, it is ReviewHub that the application needs to communicate with. If PID 1001 is forwarded to the Citrix VDA, then ReviewHub software cannot capture the data. ReviewHub software forwards the data in ProScript format on PID 1005. So, PID 1001 must be blocked from being forwarded while PID 1005 must be forwarded.

STC1160 Review Quick Start Guide

2025-11-12T20:22:09Z

STC1160 Review Quick Start Guide

2025-11-03T18:16:30Z

John Powers: /* Configure Monitor Mapping */

STC1160 Review Quick Start Guide

2025-10-24T18:14:10Z

John Powers: /* Configure Mapping */

== Configure Monitor Mapping ==
With the Review pad plugged in and showing a Windows desktop,
* Launch the ViewSonic Pen Manager application.
* Open the ViewSonic Pen Manager.

[[FILE:ViewSonic_Pen_Manager.png]]

* Select the Mapping tab.

You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad.

[[File:Review Mapper, wrong.png]]

In the picture, the screen on the right is selected. This is the main screen, not the Review Screen, so it is wrong. To correct it, select Monitor 2. The Review will not always be monitor 2. You must find the Review by matching what is on its screen with what is shown on the Mapping tab. Once this is done, you can close the application.

ScripTouch Review LCD Signature Pad

2025-10-24T18:13:44Z

John Powers: /* Quick Start */

{{Infobox computer hardware
| name = ScripTouch Review LCD Signature Pad
| logo =
| logo-size =
| logo_caption =
| image = STC1160 Hero with Image 1500w.jpg
| image-size =
| caption =
| invent-date =
| invent-name =
| conn1 = USB 2.0 (standard A-type connector)
| via1_1 =
| class-name = Interfaces
| class1 = '''[[ProScript]]'''
| manuf1 =
| designfirm =
| manufacturer = '''[[Scriptel Corporation]]'''
| introduced =
| discontinued =
| type = A large, high-resolution, e-signature device that displays documents for review.
| processor =
| frequency =
| memory =
| slots =
| rom =
| coprocessor =
| connection =
| ports =
| power = USB bus-powered or optional included AC adapter
| color = Black
| dpi =
| speed =
| language =
| weight =
| dimensions = 11.8” × 7.3” × .9” (299.72 x 185.42 x 228.6mm)
}}
[[Category:ScripTouch Signature Pads]]

[[File:Review-LCD-Hero-Wiki.jpg|250px]][[File:Review-LCD-Pos1-Wiki.jpg|250px]]
[[File:Review-LCD-Pos2-Wiki.jpg|250px]][[File:Review-LCD-Pos3-Wiki.jpg|250px]]

==Description==

The ScripTouch Review LCD (STC1160) brings to market a large, full-color, high-resolution, backlit display in an ergonomic design. This signature pad exemplifies modern design requirements, including a battery-free pen, a horizontal pen tray, and VESA 100 mounting holes. The LCD displays documents for review.Now you can review what you sign!

With Scriptel software, signatures can be captured and applied in real-time with to documents in Adobe Reader XI and DC, Adobe Acrobat XI and DC. Coupled with Concord Enterprise Edition, documents can be reviewed and securely signed with authenticated signatures on the Review pad.

'''Available Software and Integration Support for Review LCD:'''
*Adobe Acrobat and Reader plugins
*Concord.EE

==Features==

*Letter (LTR) Sized, 1080p Display
*Color, High-res, Backlit LCD
*HDMI Video Interface
*USB Bus-powered or Optional AC
*Battery-free Pen
*USB Interface
*Three levels of tilt
*Big Non-Slip Rubber Feet
*Snap-In Pen Tray
*VESA 100 Mounting Holes
*3-year Warranty with RapidCare Overnight Exchange

==Technical Specifications==

{| class="wikitable"
|Dimensions
|11.8” × 7.3” × .9” (299.72 x 185.42 x 228.6mm)
|-
||Manufacturer
|'''[[Scriptel Corporation]]'''
|-
|Product Type
|A large, high-resolution, e-signature device that displays documents for review.
|-
|Active Signing Area
|10" x 5.7" (254 x 144.78 mm)
|-
|Signature Display
|Backlit Color LCD (1920 x 1080 pixels)
|-
|Data Interface
|USB 2.0 (standard A-type connector)
|-
|Power Supply
|USB bus-powered, no separate external power supply needed
|-
|Operating Systems
|Windows
|-
|Warranty
|3 Year
|-
|Product Webpage
|'''[https://scriptel.com/products/review-lcd-signature-pad/ ScripTouch Review LCD product page]''' on scriptel.com
|-
|Model Numbers
|STC1160 ProScript
|}

==Software and Support==

===Capture and Apply Signatures to:===
*Adobe Acrobat and Reader
*Concord Enterprise Addition
*Others coming soon.

==Cleaning Instructions==
*'''[https://wiki.scriptel.com/w/Cleaning_a_Scriptel_Signature_Pad Cleaning a Scriptel Signature Pad]''' on wiki.scriptel.com

==Quick Start==
*[[STC1160 Review Quick Start Guide]]

==External References==
*'''[https://scriptel.com/products/review-lcd-signature-pad/ ScripTouch Review LCD product page]''' on scriptel.com
*'''[https://scriptel.com/shop/scriptouch-review-lcd-signature-pad/ ScripTouch Review LCD retail page]''' on scriptel.com
*'''[https://scriptel.com/datasheets/Scriptel-Review-LCD-STC1160-DataSheet.pdf ScripTouch Review LCD Data Sheet]''' on scriptel.com (PDF Download)

STC1160 Review Quick Start Guide

2025-10-24T18:12:27Z

John Powers: John Powers moved page STC1160 Quick Start Guide to STC1160 Review Quick Start Guide without leaving a redirect

== Configure Mapping ==
With the Review pad plugged in and showing a Windows desktop,
* Launch the ViewSonic Pen Manager application.
* Open the ViewSonic Pen Manager.

[[FILE:ViewSonic_Pen_Manager.png]]

* Select the Mapping tab.

You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad.

[[File:Review Mapper, wrong.png]]

In the picture, the screen on the right is selected. This is the main screen, not the Review Screen, so it is wrong. To correct it, select Monitor 2. The Review will not always be monitor 2. You must find the Review by matching what is on its screen with what is shown on the Mapping tab. Once this is done, you can close the application.

STC1160 Review Quick Start Guide

2025-10-24T18:11:32Z

John Powers: Created page with "== Configure Mapping == With the Review pad plugged in and showing a Windows desktop, * Launch the ViewSonic Pen Manager application. * Open the ViewSonic Pen Manager. FILE:ViewSonic_Pen_Manager.png * Select the Mapping tab. You will see something like this, showing both (or all) of your monitors. One of them will be the Review pad. File:Review Mapper, wrong.png In the picture, the screen on the right is selected. This is the main screen, not the Review Scr..."

File:ViewSonic Pen Manager.png

2025-10-24T18:09:39Z

John Powers: John Powers uploaded a new version of File:ViewSonic Pen Manager.png

File:ViewSonic Pen Manager.png

2025-10-24T18:02:55Z

John Powers:

2023-07-18T21:25:19Z

John Powers:

[[Category:ScripTouch Sign and Save]]
{{Infobox software
| title = ScripTouch OpenOffice Writer Plugin
| logo = [[File:OpenOffice-Writer-Wiki-Logo-2022.jpg|300px|center]]
| logo caption =
| logo alt =
| logo size =
| collapsible = 
| screenshot = 
| screenshot size =
| screenshot alt =
| caption =
| other_names =
| author =
| developer = [[Scriptel Corporation]]
| released = 
| ver layout = 
| discontinued = 
| latest release version =
| latest release date = 
| latest preview version =
| latest preview date = 
| repo =
| qid =
| programming language =
| middleware =
| engine =
| operating system =
| platform =
| included with =
| replaces =
| replaced_by =
| service_name =
| size =
| standard =
| language =
| language count =
| language footnote =
| genre =
| license =
| website = https://scriptel.com
| AsOf =
| games list =
}}
The ScripTouch OpenOffice Writer plugin allows select ScripTouch devices to sign OpenOffice Writer documents. '''Use Version 3 for LibreOffice 4 installs.'''

==Features==
*Customize signature size
*Customize signature thickness
*Customize signature style
*Customize signature background
*Multiple signatures
*'''Windows (OpenOffice Version 3.0+)'''
*'''Mac (OpenOffice Version 3.0+)'''
*'''Linux (OpenOffice Version 3.0+)'''

==Installation==

*[[ScripTouch OpenOffice Writer Plugin installation | ScripTouch OpenOffice Writer Plugin installation on Windows]]
*[[ScripTouch OpenOffice Writer Plugin installation on Mac]]

==Download==
*[http://services.scriptel.com/releases/scriptouch-signandsave/scriptouch-signandsave-openoffice-4 Download Plugin Version 4]
*[http://services.scriptel.com/releases/scriptouch-signandsave/scriptouch-signandsave-openoffice-3 Download Plugin Version 3]

==Video Tutorials==

*[[ScripTouch OpenOffice Writer Plugin installation|ScripTouch OpenOffice Writer Plugin installation on Windows]]
*[[Signature Customization]]